Odm Withdrawal Sleeve Bearing Oem
Details
The push sleeve is mainly used to fix the tapered bore bearing on the cylindrical shaft diameter on the stepped shaft. The push sleeve is pressed between the tapered bore bearing and the shaft against the shaft shoulder or similar device. It is fixed on the shaft. Since the shaft end threads can be of different sizes depending on the application, the lock nut is not supplied with the push-off sleeve.
If the hole diameter is larger than 200mm, the push-and-removal sleeve can simplify the bearing installation and disassembly by using the oil injection method.
Supply range: aperture 35mm-1000mm
There is a slit on the push sleeve, the surface taper is 1:12, AH240 and AH241 series is 1:30
application:
Widely used in coal mining equipment, jaw crusher, steel equipment, heavy machinery, cement machinery and other industries.
Product Size and Parameters
name |
Dimensions mm |
Reference Size mm |
||||||
Withdrawal bushing model |
d |
d1 |
G |
Blmax |
B4 |
D1 |
b |
f |
AHX30/500 | 530 | 480 | Tr530X6 | 209 | 211 | 514.58 | 40 | 8 |
AH30/530 | 530 | 500 | Tr560X6 | 230 | 242 | 545.58 | 45 | 10 |
AH30/560 | 560 | 530 | Tr600X6 | 240 | 252 | 576.42 | 45 | 10 |
AH30/600 | 600 | 570 | Tr630X6 | 245 | 259 | 617 | 45 | 10 |
AH30/630 | 630 | 600 | Tr670X6 | 258 | 272 | 647.83 | 48 | 10 |
AH30/670 | 670 | 630 | Tr710X7 | 280 | 294 | 689.17 | 54 | 10 |
AH30/710 | 710 | 670 | Tr750X7 | 286 | 302 | 729.83 | 54 | 10 |
AH30/750 | 750 | 710 | Tr800X7 | 300 | 316 | 771 | 54 | 12 |
AH30/800 | 800 | 750 | Tr850X7 | 308 | 326 | 821.83 | 54 | 12 |
AH30/850 | 850 | 800 | Tr900X7 | 325 | 343 | 872.75 | 60 | 12 |
AH30/900 | 900 | 850 | Tr950X8 | 335 | 355 | 923.75 | 60 | 12 |
AH30/950 | 950 | 900 | Tr1000X8 | 355 | 375 | 975.42 | 60 | 14 |
AH30/1000 | 1000 | 950 | Tr1060X8 | 365 | 387 | 1026.42 | 60 | 14 |
AH30/1060 | 1060 | 1000 | Tr1120X8 | 385 | 407 | 1088.08 | 60 | 14 |