OEM/ODM Manufacturer 32014 X - Spherical Roller Bearings CC – Chengfeng Bearing

Features

Spherical roller bearings have two rows of spherical rollers, the outer ring has a common concave spherical raceway, the inner ring has two concave raceways inclined at an angle to the bearing axis, and the center of curvature of the outer ring raceway is Bearing center is the same. The spherical roller bearing is self-aligning and is not affected by the misalignment of the shaft and the bearing housing or the deformation and deflection of the shaft, and can compensate for the concentricity error caused thereby. In addition to bearing radial load, this type of bearing can also bear bidirectional axial load and its combined load, with large bearing capacity and good anti-vibration and impact resistance.
Spherical roller bearings have 2, standard (N), 3, 4 and 5 sets of internal clearances, while tapered bore spherical roller bearings use 3 sets of clearances as the standard clearance. Bearings larger or smaller than the standard value of clearance can also be produced according to user requirements.
Vibration machinery bearings need to use larger radial clearance, 3, 4 groups or non-standard clearance between 3 and 4.
The spherical roller bearing for vibrating screen has 4 sets of clearance.
Easy to install:
Spherical roller bearings have two types of inner holes: cylindrical and conical. The taper of the conical taper hole is 1:12 and 1:30. This conical inner hole bearing is equipped with an adapter sleeve or a withdrawal sleeve. The tapered inner bore spherical roller bearing can be easily and quickly assembled on the optical shaft or stepped machine shaft.

product Range :

Inner diameter size range: 45mm~440mm
Outer diameter size range: 90mm~600mm
Width size range: 23mm~243mm

Application:

It is the most widely used type of bearings in the machinery industry among various machinery and equipment in steel, mining, papermaking, shipbuilding, textile machinery, coal mills, electric power, cement, rotary kiln and other industries.

Tolerance: CC type spherical roller bearing product accuracy has ordinary grade and P6, P5, P4 grade
Cage: The cage adopts stamping cage. If you need a bearing with a non-standard structure cage, you can contact us in advance.
Supplementary code:
CA Spherical Roller Bearings, no inner rib, small ribs on both sides, equipped with symmetrical rollers, solid brass cage
CAC spherical roller bearing, inner ring without middle rib, small ribs on both sides, with movable middle rib, with symmetrical rollers, solid brass cage
CC spherical roller bearing, without inner ring, with movable middle retaining ring, equipped with symmetrical rollers, stamped cage
MA type spherical roller bearing, the inner ring roller guiding method has been improved (roller surface roughness, raceway surface roughness, heat treatment method change, etc.) to reduce friction (special bearing for vibrating screen)
MB Spherical Roller Bearings, inner rib, small rib on both sides, with symmetrical rollers, solid brass cage
/C3 Clearance conforms to standard 3 groups
/C4 Clearance complies with standard 4 groups
/C9 bearing clearance is different from the current standard
/CRA9 bearing radial clearance is non-standard, axial clearance is required
D-split bearing
F1 carbon steel
F3 Ductile Iron
/P5 tolerance class conforms to class 5 specified by the standard
/P6 tolerance class conforms to class 6 specified by the standard
/HA ring rolling elements and cages or only the rings and rolling elements are made of vacuum smelted bearing steel
/HC ferrules and rolling elements or only the ferrules or only the rolling elements are made of carburized steel (/HC-20Cr2Ni4A;
/HC1 20Cr2Mn2MoA;/HC2-15Mn;/HC3-G20CrMo)
/HCR is expressed to distinguish the same specification, only the rolling elements are made of carburized steel
/HG rings and rolling elements or only rings made of other bearing steels (/HG-5GrMnMo;/HG1-55SiMoVA;/HG2-GCr18Mo;/HG3-42CrMo;/HG4
GCr15SiMn) manufacture
K taper bore bearing, taper 1:12
K30 tapered bore bearing, taper 1:30
N Snap groove on outer ring of bearing
Snap groove on outer ring of NR bearing with snap ring
Q1 Aluminum Iron Manganese Bronze
-2RS Bearings with RS seals on both sides
-2RS2 Bearings with steel skeleton Viton seals on both sides
/S0 bearing rings are tempered at high temperature, and the working temperature can reach 150 ℃
/S1 bearing rings are tempered at high temperature, and the working temperature can reach 200 ℃
/S2 bearing rings are tempered at high temperature, and the working temperature can reach 250 ℃
/S3 bearing rings are tempered at high temperature, and the working temperature can reach 300 ℃
/S4 bearing rings are tempered at high temperature, the working temperature can reach 350℃