Spherical Roller Bearings CA
Technical characteristics
Spherical roller bearings have two rows of spherical rollers, the outer ring has a common concave spherical raceway, the inner ring has two concave raceways that are inclined at an angle to the bearing axis, the curvature center of the outer ring raceway is consistent with the bearing center. Spherical roller bearings are self-aligning, not affected by shaft and bearing box misalignment or shaft deformation deflection, can compensate for the resulting concentricity error. In addition to bearing radial load, this type of bearing can also withstand two-way axial load and its combined load, the bearing capacity is larger, and at the same time has a better anti-vibration, impact resistance.
Spherical roller bearings can be sealed design, bearing both sides with contact seals. The seal ring adopts oil-resistant and wear-resistant rubber.
Spherical roller bearings have 2, standard (N), 3, 4 and 5 groups of internal clearance, tapered hole spherical roller bearings with 3 groups of clearance for the standard clearance. For greater or less than the standard value of clearance bearings can also be produced according to user requirements.
Vibrating machinery bearings need to use a larger radial clearance, 3, 4 groups or in 3 to 4 between the non-standard clearance.
Vibrating screen with spherical roller bearings for 4 groups of clearance.
Easy installation:
Spherical roller bearings have cylindrical and tapered bore, tapered tapered bore taper 1:12 and 1:30 two, this tapered bore bearing with a tightening sleeve or withdrawal sleeve, can be tapered bore spherical roller bearing convenient, rapid assembly in the light shaft or step machine shaft.
Product Range
* 22220 - 22280
* 22320 - 22380
* 23030 - 230/1440
* 23130 - 231/1250
* 23230 - 232/900
* 23930 - 239/1400
* 24030 - 240/1400
* 24130 - 241/1120
* 23934 - 239/1400
* 24892 - 248/1800
* 249/710 - 249/1600
* 206/1200 - 206/2000
Applications:
Steel, mining, paper, ships, textile machinery, coal mills, electric power, cement, rotary kiln and other industries in a variety of mechanical equipment, is the most widely used in the machinery industry in a class of bearings.
Tolerances:
CA, CAC type spherical roller bearing product accuracy with ordinary level and P6, P5 level for the user has special requirements can also be processed 4 level products.
Cage:
The cage is made of solid cage such as brass, bronze or carbon steel, etc. If you need bearings with non-standard structure cage, please contact us in advance.
Additional code:
CA spherical roller bearing, inner ring without center retaining edge, small retaining edge on both sides, equipped with symmetrical rollers, solid brass cage
CAC spherical roller bearings, inner ring without center retaining edge, small retaining edge on both sides, with movable center retaining ring, equipped with symmetrical rollers, solid brass cage
CC spherical roller bearings, inner ring without edge, with movable center retaining ring, equipped with symmetrical rollers, stamping cage
MA type spherical roller bearings, inner ring roller guidance method has been improved (roller surface roughness, raceway surface roughness, heat treatment methods change, etc.) to reduce friction (vibrating screen special bearings)
MB spherical roller bearings, inner circle in the edge of the block, both sides have small block, equipped with symmetrical type roller, solid brass cage
/C3 clearance in accordance with the standard provisions of the 3 groups
/C4 clearance in accordance with the standard provisions of the 4 groups
/C9 bearing clearance different from the current standard
/CRA9 bearing radial clearance is not standard, axial clearance has the requirement
D split bearing
F1 Carbon steel
F3 ductile iron
/P5 tolerance grade in line with the standard provisions of grade 5
/P6 tolerance grade in line with the standard provisions of grade 6
/HA ring rolling body and cage or only the ring and rolling body by vacuum smelting bearing steel manufacturing
/HC rings and rolling elements or rings only or rolling elements only made of carburized steel (/HC-20Cr2Ni4A.
/HC1 20Cr2Mn2MoA; /HC2-15Mn; /HC3-G20CrMo).
/HCR indicates that only the rolling element is made of carburized steel in the same specification
/HG rings and rolling elements or only rings made of other bearing steels (/HG-5GrMnMo;/HG1-55SiMoVA;/HG2-GCr18Mo;/HG3-42CrMo;/HG4
GCr15SiMn) manufacturing
K tapered bore bearing, taper 1:12
K30 tapered bore bearings, taper 1:30
N bearing outer ring upper stop groove
NR Bearing outer ring upper stop groove with stop ring
Q1Aluminium-iron-manganese bronze
-2RS bearing with RS seal on both sides
-2RS2 bearing with steel skeleton fluorinated rubber seal on both sides
/S0 bearing rings with high temperature tempering treatment, working temperature up to 150℃
/S1 bearing rings after high temperature tempering treatment, working temperature up to 200 ℃
/S2 bearing rings after high-temperature tempering treatment, working temperature up to 250 ℃
/S3 bearing rings after high-temperature tempering treatment, working temperature up to 300 ℃
/S4 bearing rings after high-temperature tempering treatment, working temperature up to 350 ℃
/W20 bearing outer ring has three lubricating oil holes (no oil groove)
/W33 bearing outer ring with oil groove and three lubricating oil holes
/W33T bearing with eight lubricating holes on the outer ring
/W33X bearing outer ring with oil groove and six lubricating holes
X1 Outer diameter non-standard
X2 Width (height) non-standard
X3 Non-standard outer diameter, width (height) (standard inner diameter)
